NEWS
Position:HOME > NEWS > Is the mixing effect of steel shot and cast steel grit good?

Is the mixing effect of steel shot and cast steel grit good?

2019-02-26 10:51:53   Review:0 Click:
  Cast steel grit is two different kinds of metal abrasives. The adaptability of steel shot is good, and G50 Cast Steel Grit can be applied to many occasions. The workpiece surface after treatment is also fairly smooth. The cleaning efficiency of cast steel grit is higher than that of the same type of steel shot, but the roughness is greatly reduced, so the applicability of steel shot is inferior to that of steel shot. So if conditions permit, can steel shot and cast steel grit be mixed to improve efficiency and ensure a certain degree of roughness?

  After mixing cast steel grit with steel shot, the hardness of steel shot is generally maintained at 40-50HRC, while cast steel grit is 50-60HRC. When used on various types of steel surface, the treatment effect on C-grade and D-grade corroded steel surface is also better.

  Moreover, cast steel grit can etch steel surface, and steel shot can strengthen steel surface.

  More practical, according to the surface hardness of the workpiece to be polished, the original corrosion degree, the required surface roughness, coating type and so on, the choice of abrasives, if the use of steel shot and cast steel grit mixed abrasive rust removal effect will be more ideal.

An article:Cast steel shot is refined from iron and steel from natural iron ore
The next one:The raw material of cut wire shot is high carbon steel or stainless steel

<View all>
I'll say somethingAlready existing0Comment,Click to view all

REAGUAN
Tel:+86-317-5295077    Fax:+86-317-5295979   Email:sale@reaguan.cn Add:YiheBuilding,CangzhouCity,Hebei Province   Copyright © Hebei Reaguan International Co.,ltd.  Technical Support:boyikeji  Technical support: BOYIKEJI