NEWS
Position:HOME > NEWS > Application of cast steel shot in stone treatment

Application of cast steel shot in stone treatment

2021-01-27 10:48:35   Review:0 Click:
  Cast steel shot is a kind of cutting tool for grinding. It is a porous object made of many fine and hard abrasive particles and binder. Abrasive directly takes on the cutting work. Due to the different thickness of cast steel shot, the surface roughness and processing efficiency of workpiece after processing are different. The coarse abrasive is used for rough grinding, and the fine abrasive is suitable for fine grinding. The coarser the abrasive is, the smaller the particle size is.

  The cast steel shot with low hardness is suitable for grinding the workpiece with high hardness. The cast steel shot works at high speed. In order to ensure safety, it should be checked before installation, and there should be no cracks and other defects. In order to make the cast steel shot work smoothly, the action balance test should be carried out before use. After working for a certain period of time, the gap on the surface of the cast steel shot will be blocked by the abrasive, the sharp angle of the abrasive will be blunt, and the original geometry will be distorted. Therefore, it must be trimmed to restore cutting ability and correct geometry. The cast steel shot needs to be trimmed with a cast steel shot pen.

  Cast steel shot blasting has the advantages of high efficiency and low production cost; at the same time, we can choose different kinds of cast steel shot according to the surface roughness of stone according to the different needs; the shot blasting process for stone surface treatment, the shot blasting is mainly made of nickel cadmium alloy, so it will not cause the stone surface rust caused by ordinary cast steel shot; the production process is environmentally friendly Energy saving, the latest use of cast steel shot blasting technology to replace the previous quartz sand blasting, dust has been reduced to the lowest level.

  The cast steel shot can be recycled for reuse; the processing quality of products treated with cast steel shot is stable, because the cast steel shot of the same standard will be automatically controlled in the process of shot blasting, and the grain on the surface of the workpiece will be cleaned evenly.

An article:Why is the surface treatment speed of cut wire shot slow
The next one:The difference between Emery cast steel grits and iron cast steel grits

<View all>
I'll say somethingAlready existing0Comment,Click to view all

REAGUAN
Tel:+86-317-5295077    Fax:+86-317-5295979   Email:sale@reaguan.cn Add:YiheBuilding,CangzhouCity,Hebei Province   Copyright © Hebei Reaguan International Co.,ltd.  Technical Support:boyikeji  Technical support: BOYIKEJI