stainless steel cut wire shot
1. Production specification: CW1.0
2. Chemical Composition of the products: C 0.45-0.75%, Mn 0.40-1.20%, Si 0.10-0.30%, S≤0.04%, P ≤0.04%
3. Hardness: cw1.0: 51-53HRC cw1.5: 41-45HRC cw2.0: 51-53HRC
4.Density: 7.8g/cucm
5. Steel cut wire shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer and stone mill.
6. Microstructure: Tempered Marten site High strength, durable Ervin life: Steel cut wire shot: 3000 cycles
Products |
Cut Wire Shot |
|
Chemical Composition |
C |
0.45~0.75% |
Mn |
0.40~1.20% |
|
Si |
0.10~0.30% |
|
S |
<0.04% |
|
P |
<0.04% |
|
Microhardness |
1.0mm:51~53 HRC(525~561HV) 1.5mm:41~45 HRC(388~436HV) |
|
Hardness Deviation |
Max Deviation ±1.0HRC or ±40HV |
|
Tensile Intensity |
1.0mm:1750~2150 Mpa 1.5mm:1250~1450 Mpa |
|
Density |
7.8g/cm3 |
